rev. 10.2.08_126 dpt50 series 1 of 2 embedded power for business-critical continuity dpt50 series 50 watts special features ? ce mark emc & lvd ? universal ac input ? fully regulated output ? overpower and short circuit protection ? constant voltage ? high efficiency ? high mtbf ? iec320 ac receptacle, 3 pin (type c14) ? built in emi filter (cispr 22 class b) ? led power good indicator ? input power <74 watts ? complies with en61000-3-2 total power: 30 - 50 watts input voltage: 127 - 300 vdc 90 - 264 vac # of outputs: triple electrical specifications safety input input range: 90-264 vac (wide range) 127-300 vdc frequency: 47-440 hz inrush current: <60 a peak @ 230 vac, cold start @ 25c efficiency: 80% @ typical full load, @115vac emi rfi: fcc part 15, subpart b class b & en55022 (cispr22) class b safety ground leakage current: 0.5ma @ 50/60 hz, 264 vac input output maximum power: 50 w (DPT51, 30w) hold-up time: 10 ms typical at full load @ 115vac overpower protection: output short circuit protection auto recover. overpower protected @ 110 - 160% above maximum rating overvoltage protection: 20-45% above nominal output maximum cable/2 meter connector: dc cable with 5 pin din operating temperature: 0c to +40c ambient. derate each output as 2.5% per degree from 40 to 60c. -20c start up. storage temperature: -40c to +85c electromagnetic susceptibility: designed to meet en61000-4; -2, -3, -4, -5, -6, -8, -11 level 3 humidity: operating; non-condensing 10% to 95% rh vibration: iec68-2-6 to the levels of iec721-3-2 mtbf demonstrated: >550,000 hours at full load and 25c ambient conditions environmental specifications ul ul60950-1 csa csa-c22.2 no. 60950-1 vde en60950-1 ce emc & lvd cb certificate and report 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 ro hs
rev. 10.2.08_126 dpt50 series 2 of 2 embedded power for business-critical continuity mechanical drawing ordering information model number output voltage minimum load maximum load peak load 1 regulation 2 ripple p/p (pard) 3 DPT51 +3.3v +5v +12v 0.8a 0.1a 0a 9a 3a 0.5a 9a 4a 1a 4% 6% 5% 50 mv 50mv 120mv dpt52 +5v +12v -12v 0.5a 0.1a 0a 8a 3a 0.5a 9a 4a 1.0a 2% 5% 5% 50 mv 120mv 120mv dpt53 +5v +15v -15v 0.5a 0.1a 0a 8a 2.4a 0.5a 9a 3.2a 0.7a 2% 5% 5% 50 mv 150mv 150mv dpt54 +5v +24v +12v 0.5a 0.1a 0a 8a 1.5a 0.5a 9a 2a 0.7a 2% 7% 5% 50 mv 240mv 120mv 1. peak current lasting <15 seconds with a maximum 10% duty cycle. 2. at 25c including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. peak-to-peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. notes : 1. specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is 0.02 (0.5mm) 3. warranty: 2 year 4. weight: 1.44 lb./ 0.65 kg 5. ac input power cord sold separately. 6. specifications are for convection rating at factory settings at 115vac input, 25c unless otherwise stated americas 5810 van allen way carlsbad, ca 92008 usa telephone: +1 760 930 4600 facsimile: +1 760 930 0698 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom telephone: +44 (0) 1384 842 211 facsimile: +44 (0) 1384 843 355 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong telephone: +852 2176 3333 facsimile: +852 2176 3888 for global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com while every precaution has been taken to ensure accuracy and completeness in this literature, emerson network power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. emerson network power and the emerson network power logo are trademarks and service marks of emerson electric co. ?2008 emerson electric co. emersonnetworkpower.com embedded computing embedded power monitoring outside plant power switching & controls precision cooling racks & integrated cabinets services surge protection emerson network power. the global leader in enabling business-critical continuity. ac power connectivity dc power 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 v1 v3 v2 v1 co m shield 1 4 2 5 3 co m pinout arrangement
|
